ReO2 Scleral Lens Cleaner User Guide & FAQ
ReO2 Scleral Lens Cleaner | Official Guide
⚠️ CRITICAL SAFETY NOTICE
- Required Saline: Use ONLY Preservative-Free 0.9% Saline Solution for both cleaning and rinsing. Never use tap water or other solutions.
- No Mixing: The liquid in the inner and outer chambers MUST NOT mix. This ensures the proper functioning of the scleral lens care process.
Operation Procedures
01. Preparation
Wash hands and rinse lenses with Preservative-Free 0.9% Saline Solution before placing them into the lens holders.
02. Filling & Chamber Integrity
Add the saline solution to the cleaning capsules up to the water line. Ensure the inner and outer chambers remain separated and do not mix.
03. Select Mode
Press the power switch to start the device. Choose your mode based on usage:
• Standard Mode: 15 minutes for daily cleaning.
• Enhanced Mode: 30 minutes for deep protein removal (recommended weekly).
04. Final Rinsing
After the device beeps, move lenses to the rinsing capsule within 1 minute. Fill with fresh saline and run the 2-minute rinse cycle.
Technical Maintenance
- Capsule Life: Cleaning capsules must be replaced after every 100 uses.
- Light Indicator: If the capsule icon is steady yellow, replace capsules and long-press the power switch for 3 seconds to reset.
- Safety First: Keep the conductive contacts and device base dry at all times. Use a standard 5V/1A adapter; do not use quick chargers.
Customer Support
For technical inquiries, replacement parts, or support, please contact us: